LLDP Commands
configure lldp ports management-address
configure lldp ports [all | <portlist>] [advertise | no-advertise]
management-address
Description
Configures LLDP ports to advertise or not advertise management address information to its neighbors.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command advertises address information for port 1:5.
configure lldp ports 1:5 advertise management-address
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
2412
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
ExtremeWare 7.7 Command Reference Guide