Show Inline-Power Configuration Port - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

show inline-power configuration port

show inline-power configuration port <portlist>

Displays inline power configuration information for the specified ports.

This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.

Syntax Description

Specifies one or more slots and ports. On a modular switch, can be a list of slots and ports. On a

stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.

Usage Guidelines

The output displays the following inline power configuration information for the specified ports:

• Config—Indicates whether the port is enabled to provide power:

— Enabled: The port is available to provide power.

— Disabled: The port is not available to provide power.

• Detect—Indicates the detect level:

— Auto: The port will power up if there is enough available power.

— Test: The port will not power up. Indicates a test mode to determine whether the port can be

• Rsvd Pwr—Displays the amount of configured reserved power in watts.

• Oper Lmt—Displays the configured operator limit in watts. The operator limit is used only with

violation precedence.

• Viol Prec—Displays the violation precedence settings:

— ADVERTISED-LIMIT: Removes or denies power if an IEEE 802.3af-compliant powered device

(PD) consumes power beyond its advertised class limit.

— OPERATOR-LIMIT: Removes or denies power if the PD consumes power beyond the configured

operator limit.

— MAX-CLASS-OPERATOR: Removes or denies power if the PD consumes power beyond the

maximum of the detected class limit or the operator limit.

— NONE: Removes or denies power if the PD consumes power in excess of the regulatory

maximum allowable wattage.

• Label—Displays a text string, up to 13 characters in length, associated with the port.

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7