Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
clear inline-power fault ports
clear inline-power fault ports <portlist>
Description
Clears the fault condition on the specified ports.
Syntax Description
portlist
Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports. On
a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Default
N/A
Usage Guidelines
None
Example
The following command clears the fault condition for port 3:
clear inline-power fault ports 3
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on the Alpine FM-32Pi PoE Module, the Summit 300 series switches, and the
Summit 400-24p switch.
2350
ExtremeWare 7.7 Command Reference Guide