Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
unconfigure inline-power usage-threshold
unconfigure inline-power usage-threshold
Description
Resets the inline power usage threshold to the default value.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
This command has no arguments or variables.
Default
The default value for the inline power usage threshold is 70 percent.
Usage Guidelines
This command resets to default the inline power usage threshold that was configured with the
following command:
configure inline-power usage-threshold
Example
The following command resets the inline power usage threshold to its default value:
unconfig inline-power usage-threshold
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
2408
ExtremeWare 7.7 Command Reference Guide