Disable Red Ports Queue - Extreme Networks ExtremeWare Command Reference Manual

PoS Commands—BlackDiamond Switch Only

disable red ports queue

disable red ports <portlist> queue <queue#>
Description
Disables RED on the specified ports.
Syntax Description
portlist
queue#
Default
Disabled.
Usage Guidelines
The keyword has been added to support the PoS module. Currently, this new keyword is only
queue
applicable to PoS ports. The keyword allows the RED function to be selectively enabled on an
individual queue basis. The
omitted, then the command applies to all egress queue numbers for the PoS port(s). RED is not
supported on the ingress queues.
Example
The following command disables RED for all PHBs except the EF PHB:
disable red ports 2:1-2:2 queue 8
History
This command was modified in an ExtremeWare IP Technology Services Release based on v6.1.5b20 to
support PoS modules.
Platform Availability
The general form of this command is available on all platforms. The optional queue parameter is
available only on the PoS module on a BlackDiamond switch.
2330
Specifies the port number(s). May be in the form 1, 2, 3-5, 2:5, 2:6-8.
Specifies the queue for which the RED function is disabled. This parameter is
supported for the PoS module only.
# parameter is an integer in the range [0-7]. If the
queue
keyword is
queue
ExtremeWare 7.7 Command Reference Guide