Extreme Networks ExtremeWare Command Reference Manual page 2387

— Needs calibrating—Firmware downloaded properly or is up and running, but values stored in
EEPROM are invalid. The unit should be returned to Extreme Networks Service for recalibration.
— Image not found—No firmware image found.
— Version mismatch—Firmware version does not match what the system expects for this particular
ExtremeWare release.
— Invalid—Firmware was corrupted. Repeat the firmware download.
Example
The following command displays inline power status for the system:
show inline-power
Following is sample output from this command:
System maximum inline-power: 32 watts
Power Usage: 70% (22 watts)
Slot
1
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
ExtremeWare 7.7 Command Reference Guide
Inline Power System Information
Main PSU Status
OFF Present, ACTIVATED
Backup PSU Status Firmware Status
Operational
show inline-power
2387