Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 64

2
ag
To delete F_Port 5 that was mapped to N_Port 2:
To create and display a static mapping:
36
0 4;6 None
1 7;8;9 None
2 5;10;11 None
3 12;13 None
------------------------------------------------------------------
switch:admin> ag --mapdel 2 "5"
Preferred N_port is set for F_Port[s]
Please delete it before removing primary N_Port
ERROR:Unable to remove F_Port[s] from mapping,
retry the command
switch:admin> ag --prefshow
F_Ports
-----------------------------------------------
10;11
4;5;6
7;8;9
----------------------------------------------
switch:admin> ag --prefdel 5 2
Preferred N_Port is deleted successfully \
for the F_Port[s]
switch:admin> ag --mapdel 2 "5"
F_Port to N_Port mapping has been updated successfully
switch:admin> ag --staticadd 17 1
switch:admin> ag --show
N_Port information :
Port PortID
-----------------------------------------------------\
0 0x010100 50:00:51:ed:6f:8e:60:28
17 0x010100 50:00:51:ed:6f:8e:60:28
Switch FO FB IP_Addr
--------------------------------------------
0 1 1 10.17.31.170
0 1 1 10.17.31.170
-------------------------------------------
F_Port information :
Port PortID Attached PWWN
------------------------------------------------
4 0x010103 20:00:00:05:1e:85:92:88
5 0x010102 20:01:00:05:1e:85:92:88
N_port Login Exceeded?
-------------------------
None
None
---------------------------------------------------
N_Port Configured Current Failover Failback PG_ID PG_Name
4;6 1 0
7;8;9 0 1
5;10;11 1 0
12;13 0 1
Preferred N_Port
0
2
3
Attached PWWN Attached_Switch
F_Ports
4;5;23;
None
N_Port Preferred \
0
0
No
No
2 SecondFabric
0 pg0
2 SecondFabric
0 pg0
F-port\
Spirit \
Spirit \
\
\
Fabric OS Command Reference
53-1002746-01