Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 39

To move the RADIUS server "radserver" from position 3 to position 1:
To configure the RADIUS server 192.168.233.48 as an LDAP server:
To add an AD/LDAP server to the configuration:
To replace the AAA service with backup option:
To change the authentication mechanism with the no logout provision:
Fabric OS Command Reference
53-1002746-01
LDAP CONFIGURATIONS
===================
LDAP configuration does not exist.
TACACS+ CONFIGURATIONS
=====================
TACACS+ configuration does not exist.
Primary AAA Service: Switch database
Secondary AAA Service: None
switch:admin> aaaconfig --move radserver -conf radius 1
switch:admin> aaaconfig --change 192.168.233.48
-conf ldap -p 3002 -s newsecret -t 1
switch:admin> aaaconfig --add 194.72.68.335
-conf ldap -p 3002 -d brocade.com -t 1
switch:admin> aaaconfig --authspec "ldap;local" -backup
switch:admin> aaaconfig --authspec radius -nologout
switch:admin> aaaconfig --show
RADIUS CONFIGURATIONS
=====================
Position : 1
Server : 172.20.1.68
Port : 1812
Secret : testing123
Timeout(s) : 3
Auth-Protocol: PEAP-MSCHAPv2
LDAP CONFIGURATIONS
===================
LDAP configuration does not exist.
TACACS+ CONFIGURATIONS
=====================
TACACS+ configuration does not exist.
Primary AAA Service: RADIUS
Secondary AAA Service: None
aaaConfig
\
\
2
11