Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 62

2
ag
To display the current Access Gateway mode:
AG group policy commands
To show current policies:
To enable a port grouping policy:
To disable a port grouping policy
To enable auto port configuration policy when both policies are disabled and the switch is already
disabled:
To disable auto port configuration policy when the switch is disabled:
To enable the ADS policy:
34
N-Port F-Port
----------------------------------------------
0 None
1 None
2 None
3 None
8 None
9 None
10 None
11 None
---------------------------------------------
switch:admin> ag --modeshow
Access Gateway mode is enabled.
switch:admin> ag --modeshow
Access Gateway mode is NOT enabled.
switch:admin> ag --policyshow
AG Policy
-----------------------------------------------------
Port Grouping
Auto Port Configuration
Advanced Device Security
WWN Based Load Balancing
-----------------------------------------------------
switch:admin> ag --policyenable pg
switch:admin> ag --policydisable pg
switch:admin> ag --policyenable auto
All Port related Access Gateway configurations will be lost.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
switch:admin> ag --policydisable auto
Default factory settings will be restored.
Default mappings will come into effect.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
Access Gateway configuration has been restored \
to factory default
switch:admin> ag --policyenable ads
Policy Name State
pg Enabled
auto Disabled
ads Disabled
wwnloadbalance Disabled
Fabric OS Command Reference
53-1002746-01