Fciphelp - Brocade Communications Systems Brocade 8/12c Command Reference Manual
Brocade fabric os command reference manual supporting fabric os v6.4.0 (53-1001764-01, march 2010)
Hide thumbs
Also See for Brocade 8/12c:
- User manual (1301 pages) ,
- Command reference manual (1132 pages) ,
- Reference (362 pages)
Table of Contents
Advertisement
2
fcipHelp
fcipHelp
Displays FCIP command information.
Synopsis
fciphelp
Description
Use this command to display a listing of Fibre Channel over IP (FCIP) commands with short
descriptions for each command. FCIP commands require an FCIP license.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To display FCIP command help information:
See Also
fastWriteCfg, portCfg, portCmd, portShow
250
switch:admin> fciphelp
fastwritecfg
portcfg
portcmd
portshow
Configure FC fastwrite feature
Create/Delete a new ip interface/route/arp entry or
fcip tunnel on the GigE port
Execute commands (ping etc) on the GigE port
Show configured ip interfaces/routes/arp entries or
fcip tunnels on the GigE Port
Fabric OS Command Reference
53-1001764-01
Advertisement
Table of Contents
