Fandisable - Brocade Communications Systems SN3000B Command Reference Manual
Brocade fabric os command reference - supporting fabric os v7.0.1 (53-1002447-01, march 2012)
Hide thumbs
Also See for SN3000B:
- Reference (966 pages) ,
- Administrator's manual (282 pages) ,
- Documentation update (60 pages)
Table of Contents
Advertisement
22
fanDisable
fanDisable
Disables a fan unit.
SYNOPSIS
fandisable unit
DESCRIPTION
Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
NOTES
This command is not available on nonbladed systems except for the Brocade 5300.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
unit
EXAMPLES
To disable a fan unit:
SEE ALSO
fanEnable,
260
Specifies the number of the fan unit to disable.
switch:admin> fandisable 1
Fan unit 1 has been disabled
fanShow
Fabric OS Command Reference
53-1001764-01
Advertisement
Chapters
Table of Contents
