Errdump - Brocade Communications Systems Brocade 8/12c Command Reference Manual

errDump

Displays the error log without pagination.
SYNOPSIS
errdump [-a | -r ]
DESCRIPTION
Use this command to dump external error log messages without any page breaks. When executed
without operands, this command prints all error messages for the logical switch context in which the
command is executed. When used with the -a option, the command prints the error messages for the
entire chassis. The messages are dumped to the console without page breaks. The -r operand displays
the messages in reversed order.
The output of this command is unique for each control processor (CP). On dual CP systems this
command must be executed on each CP to obtain a complete record.
The following information is displayed in each message:
Start delimiter
Timestamp
Message ID
External sequence number
Security audit flag
Severity
Switch name
Message
End delimiter
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
-a
-r
Fabric OS Command Reference
53-1001764-01
Delimiter string for the start of a message.
Timestamp for the message.
Message identifier.
Sequence number for the message.
Security audit message displayed as AUDIT.
Severity of the message. Valid values include INFO, WARNING, ERROR, and
CRITICAL.
Switch name for the generator of this message, or "chassis".
Message body.
Delimiter string for the end of a message.
Displays messages for the entire chassis for a user with admin and chassis
permissions. This operand is optional; if omitted, the messages for the current
logical switch context are displayed.
Displays messages in reversed order. This operand is optional; if omitted, the
messages display in chronological order.
22
errDump
235