Diagdisablepost - Brocade Communications Systems Brocade 8/12c Command Reference Manual

diagDisablePost

Disables the power-on self-test (POST).
SYNOPSIS
diagdisablepost
DESCRIPTION
Use this command to disable POST. A reboot is not required for this command to take effect. Use the
diagPost command to display the current POST status, and use diagEnablePost to enable POST.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To disable the POST:
SEE ALSO
diagEnablePost,
Fabric OS Command Reference
53-1001764-01
switch:admin> diagdisablepost
Config update Succeeded
Diagnostic POST is now disabled.
diagPost
22
diagDisablePost
217