configDefault
Synopsis
Availability
Description
Operands
32
Restore system configuration to default settings.
configDefault
admin
Use this command to reset system configuration to default values.
All configuration parameters, with the following exceptions, are reset to
default values:
• Ethernet MAC address, IP address, and subnetmask
• IP gateway address
• license keys
• OEM customization
• SNMP configuration
• system name
• worldwide name
• Zoning configuration
See the Configure command for more information on default values
Note
for configuration parameters.
Do not run this command on an operational switch. First disable the
Note
switch using the switchDisable command.
Some configuration parameters are cached by the system. To avoid
unexpected switch behavior, reboot the system after executing this
command.
None.
Fabric OS Reference Manual