Dlt Drive Expert Tools; Table 4-12 Drive Expert Tool Commands - HP Surestore Tape Library Model 2/28 User Manual

Library Operation
Troubleshooting

DLT Drive Expert Tools

The following table lists expert tool categories, and the specific commands
available within each for the drives.
Table 4-12 Drive Expert Tool Commands
Category Command
File
EXIT
VIEW LOGS
Logs
CLEAR LOGS
DESCRIBE
Info
DRIVE INFO
TAPE
Tests
VALIDATE
SELFTEST
TUR
TAPE COPY
UNLOAD TAPE
LOAD TAPE
Utility
REWIND
MODE SENSE
MEDIA
REMOVAL
MODE SELECT
Options
DISPLAY
FORMAT
4-44
Exits the Support Tools Manager.
Displays the Read Error Counter Page, Write Error Counter
Page, or Compression Log.
Clears the Read Error Counter Page or the Write Error
Counter Page.
Displays the product ID, product revision level, and firmware
revision level.
Displays power-on hours and tape motion hours.
Reads a suspect tape until either an error is detected or end
of data is encountered.
Executes the DLT device's built-in diagnostic selftest.
Sends a Test Unit Ready command.
Performs a tape-to-tape copy.
Performs an unload sequence.
Performs a load sequence.
Rewinds to beginning of tape.
Displays user selected mode pages.
Prevents or allows medium removal.
Configures user selected mode pages.
Displays data as either raw hex, decoded formatted text, or
both.
Effect