QuickLoop Commands
Feature Telnet Commands
Table 20. Zoning Commands (continued)
Command
Zone Configuration and Management
cfgAdd
cfgClear
cfgCreate
cfgDelete
cfgDisable
cfgEnable
cfgRemove
cfgSave
cfgShow
cfgTransAbort
For detailed information about these commands, see the QuickLoop User's
Guide.
Table 21. QuickLoop Commands
Command
qlDisable
qlEnable
qlPartner
qlPortDisable
Description
Adds a zone to a zone
configuration.
Clears all zone configurations.
Creates a zone configuration.
Deletes a zone configuration.
Disables a zone configuration.
Enables a zone configuration.
Removes a zone from a zone
configuration.
Saves zone configurations in
flash memory.
Shows zone configuration
definition.
Aborts the current zoning
transaction.
Description
Disables QuickLoop mode on the switch.
Enables QuickLoop mode on the switch.
Specifies a partner for a QuickLoop or displays
information about the existing partner.
Disables a port from QuickLoop mode.
277