Qlstatsshow - HP Surestore 6164 - Switch User Manual

qlStatsShow

Synopsis
Availability
Description
Operands
Example
See Also
QuickLoop Telnet Commands
Displays QuickLoop statistics.
qlStatsShow
All users
This command displays the following QuickLoop switch statistics:
•
Last QL init time:
•
QL init attempted:
•
QL init succeeded:
•
Single switch QL:
•
Dual switch QL:
• Number of times QuickLoop is enabled
QL enabled:
• Number of times QuickLoop is disabled
QL disabled:
•
Port caused QL init:
initialization
* These numbers are valid only when two switches are configured to run as peers in
QuickLoop.
None
The following entry displays QuickLoop switch statistics:
sw5:admin> qlStatsShow
portStatShow
qlShow
Time of last QuickLoop initialization
Number of QuickLoop initialization attempts
Number of times QuickLoop is initialized
Number of times as single-switch QuickLoop*
Number of times as dual-switch QuickLoop*
Port that caused last QuickLoop
39