Secure Fabric Os Commands - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands for Licensed Products

Secure Fabric OS Commands

The following commands are available with the purchase of a Security license
key. For more detailed information about trunking refer to the HP StorageWorks
Secure Fabrics OS Version 1.0 User Guide.
Table 24: Secure Fabric OS Commands
secfabricshow
secfcsfailover
sechelp
secmodeenable
secmodedisable
secmodeshow
secnonfcspasswd
secpolicyabort
secpolicyactivate
secpolicyadd
secpolicycreate
secpolicydelete
secpolicydump
secpolicyfcsmove
secpolicyremove
secpolicysave
secpolicyshow
secstatsreset
secstatsshow
sectemppasswdreset
908
Command Description
Displays security related fabric information.
Enables a Backup FCS switch to take over as Primary
FCS switch.
Display information about security telnet commands.
Enable security mode.
Disable security mode.
Display if security mode is enabled or disabled.
Set the admin password for non-FCS switches.
Aborts all changes to the defined database that have
not been saved.
Apply defined policy set to all switches in the fabric.
Add members to an existing policy.
Create a new policy.
Delete an existing policy.
Show all members of existing policies.
Move a member in the FCS policy.
Remove members from an existing policy.
Save a defined security policy to flash memory on all
switches in the fabric.
Show an existing security policy.
Reset security statistic for a policy or all policies to
zero.
Display security statistic for a policy or for all policies.
Reset a password on a remote switch.
Fabric OS Version 3.1.x/4.1.x Reference Guide