See Also; Switchcfgspeed; Syntax; Availability - HP StorageWorks MSA 2/8 - SAN Switch User Manual

See Also

Also see the following related commands:

switchcfgspeed

Syntax

This command uses the following syntax:

Availability

This command is available to admin users only.

Description

Use this command to specify the speed of all the ports on a switch at a particular
level. The configuration is saved in the non-volatile memory and persists across
switch reboot or power cycle.
If the command is specified without an operand, you are prompted to enter the
speed level value. An input of CTRL-D cancels the configuration update.
The output of portshow and portcfgshow displays the speed level:

Operands

This command has the following operand:
speedlevel - Specify the speed of a port. This operand is optional. Valid
values are one of the following:
ISL Trunking Version 3.1.x/4.1.x User Guide
switchcfgtrunk
portshow
portcfgshow
switchshow
switchcfgspeed <[speedlevel]>
In the portshow output, the speed level is indicated as the current port speed
of "1 Gbps" or "2 Gbps."
In the portcfgshow output, the speed level is indicated as "1 G", "2 G", or
"AN" (Auto-Negotiate).
0 - Auto-negotiating mode. The port automatically configures for the highest
speed.
ISL Trunking Commands
51