Fabric OS Commands
switchCfgSpeed
Configure all ports of the switch to a particular speed level.
Synopsis
switchCfgSpeed speed_level
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to configure the speed of all the ports on a switch to a
particular level. The configuration is saved in the non-volatile memory and
persists across switch reboot or power cycle.
The output of portShow displays achieved speed level and portCfgShow
displays the user's desired speed setting. In the portShow output, the speed
level is indicated as the current port speed of "1-Gbps" or "2-Gbps." In the
portCfgShow output, the speed level is indicated as "1G," "2G," or "AN"
(Auto-Negotiate).
Operands
This command has the following operand:
speed_level
806
Specify the speed of a port. This operand is required. Valid
values are one of the following:
0: Auto-sensing mode. The port automatically configures for
the highest speed.
1: 1-Gbps mode. The port will be at fixed speed of 1-Gbps.
2: 2-Gbps mode. The port will be at fixed speed of 2-Gbps.
Fabric OS Version 3.1.x/4.1.x Reference Guide