Part Code 03022 - HP StorageWorks P9000 Manual

Part code 03022

Table 33 Error codes (part code 03022)
Part Error
Code Number
03022 105131
03022 105132
03022 105133
03022 105134
03022 105135
03022 105136
03022 105137
03022 105138
03022 105139
03022 105140
03022 105141
03022 105142
03022 105143
03022 105144
03022 105145
03022 105146
03022 105147
03022 105148
03022 105149
03022 105150
03022 105151
03022 105152
03022 105153
92 Message (part code group 3nnn)
Error Message
SSID cannot be allocated to all the LDEVs
with the specified initial SSID.
Short of {0} LDEV ID(s).
The processing cannot continue due to
an internal logic contradiction.
An unconfigured LDEV has been
selected.
The selected LDEV has an LUN path
setting.
The specified LDEV is a pool volume.
The selected LDEV has an LDEV Security
setting.
The specified LDEV is a reserved volume
of Auto LUN.
The selected LDEV has been set to a
LUSE volume.
The specified LDEV is a remote command
device.
The selected LDEV has been set as a
journal volume.
The selected LDEV has been set as a
quorum disk volume.
The selected LDEV has an access
attribute setting.
An LDEV whose emulation type is
OPEN-L or OPEN-M is selected.
An LDEV for FICON(R) Data Migration
is selected.
The target LDEV is not associated with a
pool.
The target LDEV is blocked.
The combo box is not selected.
The processing cannot continue due to
an internal logical contradiction.
Select a table.
The processing cannot continue due to
an internal logical contradiction.
An LDEV in Normal or Quick Formatting
status is selected.
The specified value is outside the range.
Recommended Action
Check the setting(s).
Check the setting(s).
Execute refresh.
Execute refresh.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Execute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the setting(s).
Check the setting(s).
Execute refresh.
Specify the subject to be operated.
Execute refresh.
Check the setting(s).
Check the setting(s).
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
E
W
E
E
W