Part Code 01022 - HP StorageWorks P9000 Manual

Part code 01022

Table 26 Error codes (part code 01022)
Part Error
Code Number
01022 105009
01022 105010
01022 10501 1
01022 105012
01022 105013
01022 105014
01022 105015
01022 105016
01022 105017
01022 105018
01022 105019
01022 105020
01022 105021
01022 105022
01022 105023
01022 105024
Error Message
All the check boxes are cleared.
The host group name is not set.
The number of characters specified in
the host group name has exceed the
maximum.
Invalid characters are used in the
specified host group name. You cannot
use the following characters:
\/:,;*?"<>|.
The specified host group name is already
used by another host group, which is on
the same port.
The default host group name cannot be
used for the host group setting.
Host mode "4C" is set to the host group.
However, this host group is connected
to a volume that cannot be used for
External Storage.
Detail button pressing detection without
line selection.
The Detail button pressing is detected by
two or more-line selection.
Multiple host groups are selected on the
same port.
The specified port is neither Target nor
RCU Target.
Hosts cannot be added because none
of [Available Hosts] table rows is
selected.
No more HBA WWN can be registered,
because the number of registered HBA
WWNs has reached the maximum.
The selected information cannot be
added, because a duplicated HBA
WWN is in the information being
selected.
The selected information cannot be
added because a duplicated host name
is in the information being selected.
The specified HBA WWN cannot be
added because it is already used in the
same port, or it exists in the [Selected
Hosts] table.
Recommended Action
Check the check boxes for the items that
you want to change, then retry the
operation.
Enter the host group name from 1 to 64
characters.
Enter the host group name from 1 to 64
characters.
Remove the invalid characters, then retry.
Specify another host group name.
Specify another host group name.
Check the setting(s).
Select one table row.
Select one table row.
Check the setting(s).
Check the setting(s).
Select one or more table rows.
Check the setting(s).
Only the first duplicate item is added.
Check the contents that have been
added.
Only the first duplicate item is added.
Check the contents that have been
added.
Check the setting(s).
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 01022 63