Advertisement
•
service — Indicates service type. Can be one of the following: telnet, ssh, http, https or
snmp.
Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
User Guidelines
•
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is
defined on the appropriate interface.The system supports up to 128 management access
rules.
Example
The following example shows how all ports are denied in the access-list called "mlist".
console(config)# management access-list mlist
console(config-macl)# deny
management access-class
The management access-class Global Configuration mode command defines which management
access-list is used. To disable restriction, use the no form of this command.
Syntax
management access-class {console-only | name}
no management access-class
•
name — Name of the access list. If unspecified, defaults to an empty access-list.(Range: 1
- 32 characters)
•
console-only — The Ethernet Switch Module can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
172
Management ACL
Advertisement
