Management Access-Class - Dell PowerConnect 6024F Command Line Interface Reference Manual

User Guidelines
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is
defined on the appropriate interface.The system supports up to 256 management access
rules.
Example
The following example shows how all ports are denied in the access-list called "mlist".
Console (config)# management access-list mlist
Console (config-macl)# deny

management access-class

The management access-class global configuration command defines which management access-
list is used. To disable restriction, use the no form of this command.
Syntax
management access-class {console-only | name}
no management access-class
• name—A valid access-list name.
• console-only—The device can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access-list called "mlist" as the management access-list.
Console (config)# management access-class mlist
210
Management ACL