Fandisable - Brocade Communications Systems 8 Command Reference Manual

fanDisable

Disables a fan unit.
Synopsis fandisable unit
Description Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
Notes This command is not available on nonbladed systems except for the Brocade 4100, 4900, and
5300.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
unit
Examples To disable a fan unit:
See Also fanEnable, fanShow
Fabric OS Command Reference
53-1001764-02
Specifies the number of the fan unit to disable.
switch:admin> fandisable 1
Fan unit 1 has been disabled
2
fanDisable
241