Brocade Communications Systems 8 Command Reference Manual page 473

--delete
--flush manual-sa
--show
Fabric OS Command Reference
53-1001764-02
Deletes a specified policy or all policies of a certain type from the
configuration database. You can delete IPSec policies, IKE policies, and SADB
entries. When deleting IPSec policies, you have the option to delete specific
components only, such as the transform or the selector, and recreate these
components without having to recreate the entire policy. The syntax for
deleting a policy is as follows:
ipsecconfig --delete type [subtype] arguments
type Specifies the policy to be deleted. Valid policy types include:
policy ips Deletes a specified IPSec policy or all IPSec policies.
subtype Optionally specify a component (subtype) to delete the component only:
selector Deletes the selector for a specified IPSec policy, or all selectors of all
configured IPSec policies.
transform Deletes the transform for a specified IPSec policy, or all transforms of all
configured IPSec policies.
sa-proposal Deletes the SA proposal for a specified IPSec policy, or all SA proposals of
all configured IPSec policies.
sa Deletes the SAs for a specified IPSec policy, or all SAs of all configured
IPSec policies.
policy ike Deletes a specified IKE policy or all configured IKE policies.
sa Deletes a specified SADB entry or all manual SADB entries.
manual-sa Deletes the SA policy entries used in manually keyed SA entries from the
configuration database.
arguments Specifies the selection as one of the following:
-a Deletes all configuration information for the specified type and subtype.
-tag name Deletes all configuration information for the specified policy type.
Flushes all SA entries (including manually keyed and automatically keyed
SAs) from the kernel SADB. All active TCP sessions that are using IPSec
protection are terminated when this command is executed. This command,
unlike delete, does not remove the policies from the configuration database.
Flushing any other policy parameters is not supported.
Displays current IPSec or IKE configuration. The syntax for the display option
is as follows:
--show type [subtype] arguments]
type Specifies the policy to be displayed. Valid values for type include the
following:
policy ips Displays the IPSec policy configuration. A policy subtype must be specified
when displaying the IPSec policy configuration. Valid subtypes include the
following:
2
ipSecConfig
441