Sensorshow - Brocade Communications Systems 8 Command Reference Manual

2

sensorShow

sensorShow
Displays sensor readings.
Synopsis sensorshow
Description Use this command to display the current temperature, fan, and power supply status and readings
from sensors located on the switch. The actual location of the sensors varies, depending on the
switch type.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To view all sensor values:
See Also fanShow, tempShow
864
switch:admin> sensorshow
sensor 1: (Temperature) is Ok, value is 39 C
sensor 2: (Temperature) is Absent
sensor 3: (Temperature) is Absent
sensor 4: (Temperature) is Absent
sensor 5: (Temperature) is Ok, value is 26 C
sensor 6: (Temperature) is Ok, value is 27 C
sensor 7: (Fan
sensor 8: (Fan
sensor 9: (Fan
sensor 10: (Power Supply ) is Ok
sensor 11: (Power Supply ) is Absent
sensor 12: (Power Supply ) is Ok
sensor 13: (Power Supply ) is Absent
) is Ok, speed is 2537 RPM
) is Ok, speed is 2537 RPM
) is Ok, speed is 2556 RPM
Fabric OS Command Reference
53-1001764-02