Brocade Communications Systems 8 Command Reference Manual page 198

2
cryptoCfg
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Use the --show -tapepool command to display tape pool configuration parameters for all Tape
pools or for a specific tape pool. For each tape pool, the display includes the following information:
•
•
•
•
•
Use the --show -LUN command for a listing of Crypto LUN status or configuration information for a
specific CTC.
When used with -stat the display includes the following LUN runtime status information:
•
•
•
•
•
•
•
•
166
LUN type: disk, tape drive, tape medium changer, tape attached medium changer,
offline/unknown, or unsupported/other
LUN serial number (disk only): alpha-numeric ID
Encryption mode: encrypt or cleartext
Encryption format: native or DF compatible
Encrypt existing data: enabled or disabled
Rekey: enabled or disabled
LUN state: refer to the appendix in the Fabric OS Encryption Administrator's Guide
Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none
Key ID state: Rekey
Key ID: numeric identifier
Key creation time: date and time of key creation
Key life (in days); number of days until expiration
Rekey status: numeric value
Key expiration time
Rekey session number: numeric value
Percentage complete
Rekey state: Read or write Phase
Rekey role: primary, alternate
Block size: numeric value
Number of blocks: numeric value
Current logical block address (LBA) being processed
tape pool Label: user-define label
Key Life: Life span in minutes
Encryption mode: encrypt or cleartext
Encryption format: native or DF compatible
Configuration status: committed or defined
Container name: user-defined label
Type: disk or tape
EE node: node WWN
EE slot: EE slot number
Target: target port WWN and node WWN
Target PID
VT: virtual target port WWN and node WWN
VT PID: virtual target PID
Fabric OS Command Reference
53-1001764-02