Chassisshow - Brocade Communications Systems 8 Command Reference Manual

2

chassisShow

chassisShow
Displays all field replaceable units (FRUs).
Synopsis chassisshow
Description Use this command to inventory and display the FRU header content for each object in the chassis
and chassis backplane version.
Refer to
TABLE 5
Line
1
2
3
4
5
6
7
8
9
10
11
12
13
14
On some platforms, for certain FRU types, a few items might not be available. In these cases, the
lines are suppressed. Possibly affected lines are 1, 3 through 7, 9, and 11 through 14. In addition,
for lines 11 through 14, if there is no data set, these lines are suppressed.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
110
theTable 5 for more information about the lines and their meaning.
Command output descriptions
Description
If applicable, the first line displays the chassis backplane version number, in hexadecimal.
Object type: , ,
CHASSIS FAN
(world wide name), or
UNKNOWN
Object number: (for blades),
Slot nn
If the FRU is part of an assembly, a brief description, in parentheses, displays.
FRU header version number:
Value to calculate the object's power consumption: positive for power supplies and negative for
consumers.
Power Consume Factor: -xxx
Part number (up to 14 characters):
Serial number (up to 12 characters):
FRU manufacture date:
Manufacture:Day: dd Month: mm Year: yyyy
Date of the last FRU header update:
Cumulative time, in days, that the FRU has been powered on:
Current time, in days, since the FRU was last powered on:
Externally supplied ID (up to 10 characters):
Externally supplied part number (up to 20 characters):
Part Num: xxxxxxxxxxxxxxxxxxxx
Externally supplied serial number (up to 20 characters):
Serial Num:xxxxxxxxxxxxxxxxxxxx
Externally supplied revision number (up to 4 characters):
, (switch),
POWER SUPPLY SW BLADE
.
(for everything else).
Unit nn
Header Version: x
Factory Part Num: xx-xxxxxx-xx
Factory Serial Num: xxxxxxxxxx
Update: Day: dd Month: mm Year: yyyy
Time Awake:ddd days
ID: xxxxxxxxxx
Revision Num: xxxx
(control processor),
CP BLADE
Time Alive:dddd days
Fabric OS Command Reference
53-1001764-02
WWN