Shellflowcontroldisable - Brocade Communications Systems 8 Command Reference Manual

shellFlowControlDisable

Disables XON/XOFF flow control on the console serial port.
Synopsis shellflowcontroldisable
Description Use this command to disable XON/XOFF flow control on the console serial port. Flow control is
disabled by default.
Because this command changes the flow control on the console serial port, it must be executed
from a session that is logged in from the console serial port. This command cannot run from a
Telnet session.
This setting is saved in the configuration database; therefore, it is persistent across reboots and
power cycles.
Notes On dual-CP systems, a reboot on the standby CP is required for this command to take effect. No
action is required on the active CP.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To disable flow control:
See Also shellFlowControlEnable
Fabric OS Command Reference
53-1001764-02
switch:admin> shellflowcontroldisable
Disabling flowcontrol
flow control is now disabled
shellFlowControlDisable
2
873