Firmwareshow - Brocade Communications Systems 8 Command Reference Manual

2

firmwareShow

firmwareShow
Displays the Fabric OS versions on all firmware partitions in the system.
Synopsis firmwareshow
Description Use this command to display the FOS, SAS, and SA firmware versions. The command shows the
firmware versions on both the primary and secondary partitions of the storage device. When this
command is issued while a firmware download is in process, an appropriate warning message is
displayed,
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the firmware versions on a Brocade DCX while a firmware download is in progress:
To display the firmware version on a Brocade 4100:
See Also firmwareDownload, firmwareDownloadStatus
344
switch:admin> firmwareshow
Slot Name Appl
-----------------------------------------------------------
4 FR4-18i FOS
6 CP0 FOS
7 CP1 FOS
10 FA4-18 FOS
SAS
WARNING: Firmwaredownload is in progress.
switch:admin> firmwareshow
Appl Primary/Secondary Versions
------------------------------------------
FOS v6.4.0
v6.4.0
Primary/Secondary Versions
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v6.4.0
v3.4.0
v3.4.0
Status
STANDBY
ACTIVE *
Fabric OS Command Reference
53-1001764-02