Brocade Communications Systems 8 Command Reference Manual page 918

2
snmpConfig
--enable mibCapability -mib_name mib_name
--disable mibCapability -mib_name mib_name
-trap_name trap_name
System Group Configuration Parameters
sysDescr
sysLocation
886
TABLE 25
SNMP Trap bit mask values
MIB Trap Name
connUnitSensorStatusChange (5)
connUnitPortStatusChange (6)
FICON-MIB (FICON events)
linkRNIDDeviceRegistration (1)
linkRNIDDevicedeRegistration (2)
linkLIRRListenerAdded (3)
linkLIRRListenerRemoved (4)
linkRLIRFailureIncident (5)
HA-MIB (High-Availability events)
fruStatusChanged (1)
cpStatusChanged (2)
fruHistoryTrap (3)
FCIP-MIB (FCIP events)
ISCSI-MIB (ISCSI events)
iscsiTgtLoginFailure (1)
iscsiTgtLoginFailure (2)
iscsiTgtLoginFailure (3)
IF-MIB (link status events)
linkUpTrap (3)
linkdownTrap (4)
BD-MIB (bottleneck detection events)
bdTrap (1)
bdClearTrap (2)
Enables the specified MIB noninteractively.
Disables the specified MIB noninteractively. When used with the trap name
operand, only the specified trap is disabled.
Specifies the name of the trap to be enabled or disable. This operand is
optional. Use snmpConfig
The system description. The default value is Fibre Channel switch.
The location of the system (switch). The default value is End User Premise.
The string must be at least 4 characters in length; the maximum length is
255 characters.
Bit mask Default
0x20 Enabled
0x40 Enabled
0x1 Enabled
0x2 Enabled
0x4 Enabled
0x8 Enabled
0x10 Enabled
0x20 Enabled
0x1 Enabled
0x2 Enabled
0x4 Enabled
0x8 Enabled
0x1 Enabled
0x1 Enabled
0x2 Enabled
0x4 Enabled
0x8 Enabled
Enabled
0x8 Enabled
0x10 Enabled
Enabled
0x2 Enabled
0x4 Enabled
show mibCapability for a listing of valid traps.
--
Fabric OS Command Reference
53-1001764-02