Brocade Communications Systems 8 Command Reference Manual page 201

Use the --show -rekey crypto_target_container_name LUN_Num initiator_PWWN command to
display all rekey sessions in progress for a specific Crypto LUN/initiator pair of a specific
CryptoTarget container. The display includes the following information:
•
•
•
•
•
•
•
•
•
Fabric OS Command Reference
53-1001764-02
-
EE node: node WWN
-
EE slot: Slot number
-
Target: target port WWN and node WWN
-
Target PID: target PID
-
VT: virtual target port WWN and node WWN
-
VT PID: virtual target PID
-
Host (initiator) PWWN
-
Host (initiator): node WWN
-
Host (initiator) PID: hoist PID
-
VI: virtual initiator port WWN and node WWN
-
VI PID: virtual initiator PID
-
LUN Number: numeric identifier
-
LUN Serial Number: alpha-numeric identifier
-
Percentage complete: numeric value
-
Rekey state displays one of the following:
•
Read Phase
•
Write Phase
•
HA Sync Phase
•
LUN Cleanup
-
Rekey role: Primary or Backup
-
Block Size: in KB
-
Current logical block address (LBA) being processed: block address
LUN number: numeric ID
LUN Serial Number (SN): alpha-numeric label
CryptoTarget container Name: user-defined name
Target: target port WWN and node WWN
Target PID: target PID
EE node name: node WWN
EE slot: slot number
Number of rekey sessions in progress: numeric value
For each rekey session the display includes:
-
Rekey session number: numeric value
-
Percent completion: numeric value
-
Rekey state. Displays one of the following:
•
Rekey Setup
•
LUN Prep
•
Key Update
2
cryptoCfg
169