Portlogclear - Brocade Communications Systems 8 Command Reference Manual

portLogClear

Clears the port log.
Synopsis portlogclear
Description Use this command to clear the port log. It is recommended that you clear the port log before
triggering an activity so that the log displays only the log events related to that activity.
If the port log is disabled, portLogClear enables it. The port log is disabled automatically when
certain errors occur to allow the collection of all the information needed to understand the cause of
the error. When the port log is disabled, the events already present in the log are preserved, but
new events are not collected.
The following errors disable the port log:
Refer to the Fabric OS Message Reference for more information on these errors.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands None
Examples To clear the port log:
See Also portLogDump, portLogShow
Fabric OS Command Reference
53-1001764-02
FCPH, EXCHBAD
FCPH, EXCHFREE
NBFSM, DUPEPORTSCN
UCAST, RELICPDB
switch:admin> portlogclear
switch:admin> portlogshow
port log is empty
2
portLogClear
711