Portlogtypeenable - Brocade Communications Systems 8 Command Reference Manual

portLogTypeEnable

Enables the port log of a specified port log type.
Synopsis portlogtypeenable id
Description Use this command to enable the port log for a specified port log type.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
id
Examples To enable logging of type 2 port log events:
See Also portLogEventShow, portLogTypeDisable
Fabric OS Command Reference
53-1001764-02
Specifies a nonzero value that corresponds to the port log type to be enabled.
Use portLogEventShow for a listing of values corresponding to supported log
types.
switch:admin> portlogtypeenable 2
portLogTypeEnable
2
729