Brocade Communications Systems 8 Command Reference Manual page 532

2
lsCfg
To assign ports to a logical switch:
To assign ports to a logical switch without confirmation:
To display the logical switch configuration for :FC ports only:
To display the logical switch configuration for GbE ports only (in the following example, all GbE ports
are in logical switch 2):
500
switch:admin> lscfg --config 2 -port 10-12
This operation requires that the affected ports be disabled.
Would you like to continue [y/n]?: y
Making this configuration change.
Configuration change successful.
Please enable your ports/switch when you are ready to continue.
switch:admin> lscfg --config 2 -port 0-4 -force
Configuration change successful.
Making this configuration change.
Please enable your ports/switch when you are ready to continue.
switch:admin> lscfg --show
Created switches: 128(ds)
Port 0 1
-------------------------------------------------------------------
FID 1 | 1 |
Port 10 11
-------------------------------------------------------------------
FID 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 |
Port 20 21
-------------------------------------------------------------------
FID 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 |
Port 30 31
-------------------------------------------------------------------
FID 128 | 128 | 128 |
switch:admin> lscfg --show -ge
Created switches: (ds)
Slot 1 2
-------------------------------------------------------
Port
0 | | 2 |
1 | | 2 |
2 | | 2 |
3 | | 2 |
4 | | 2 |
5 | | 2 |
6 | | 2 |
7 | | 2 |
8 | | 2 |
9 | | 2 |
10 | | 2 |
11 | | 2 |
Please wait...
Please wait...
1(bs) 2
2 3 4 5
1 | 1 | 1 | 1 |
12 13 14 15
22 23 24 25
32 33 34 35
2 | 2 | 2 | 128 | 128 | 128 | 128 |
2(bs) 1
3 4 5 6
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
6 7 8
1 | 1 | 2 |
16 17 18
26 27 28
36 37 38
7 8
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
Fabric OS Command Reference
9
2 |
19
29
39
53-1001764-02