Brocade Communications Systems 8 Command Reference Manual page 222

2
cryptoCfg
To view the changes:
To initiate a manual failback of an encryption engine:
E. Storage device configuration
1. Create a zone that includes initiator and target.
190
Operation Succeeded
SecurityAdmin:switch> cryptocfg --show -hacluster -all
Encryption Group Name: brocade_1
Number of HA Clusters: 1
HA cluster name: HAC2 - 1 EE entry
Status: Defined
WWN
10:00:00:05:1e:39:53:67
SecurityAdmin:switch> cryptocfg --failback -EE
10:00:00:05:1e:39:53:67 0 22:00:00:04:cf:6e:57:62
Operation Succeeded
a. Determine the device configuration.
FabricAdmin:switch>nsshow
{
Type Pid COS PortName
N 010600; 2,3;10:00:00:00:c9:2b:c9:3a;20:00:00:00:c9:2b:c9:3a; na
NodeSymb: [35] "Emulex LP9002 FV3.82A1 DV5-4.81A4 "
Fabric Port Name: 20:06:00:05:1e:41:9a:7e
Permanent Port Name: 10:00:00:00:c9:2b:c9:3a
Port Index: 6
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
The Local Name Server has 1 entry }
FabricAdmin:switch>nscamshow
nscamshow for remote switches:
Switch entry for 2
state rev owner
known v611 0xfffc01
Device list: count 13
Type Pid COS
NL 0208d3; 3;20:0c:00:06:2b:0f:72:6d;20:00:00:06:2b:0f:72:6d;
FC4s: FCP
PortSymb: [55] "LSI7404XP-LC BR A.1 03-01081-02D FW:01.03.06 Port 1 "
Fabric Port Name: 20:08:00:05:1e:34:e0:6b
Permanent Port Name: 20:0c:00:06:2b:0f:72:6d
Port Index: 8
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
b. Create and enable a zone named "itzone" that includes initiator and target.
FabricAdmin:switch> zonecreate itzone, "10:00:00:00:c9:2b:c9:3a; 20:0c:00:06:2b:0f:72:6d"
Slot Number Status
0 Online
PortName
NodeName
NodeName
Fabric OS Command Reference
TTL(sec)
53-1001764-02