Brocade Communications Systems 8 Command Reference Manual page 69

To display the WWN mappings when WWN load balancing policy is enabled:
See Also portCfgNPort, portCfgNPIVPort, agAutoMapBalance
Fabric OS Command Reference
53-1001764-02
switch:admin> ag --wwnmapshow
Static Device Mapping Information:
WWN, 1st N_Port 2nd N_Port PG_ID Current Enabled
----------------------------------------------------------------
No static mappings are defined
----------------------------------------------------------------
Dynamic Device Mapping Information:
WWN,
----------------------------------------------------------------
10:00:00:06:2b:11:52:df 23
----------------------------------------------------------------
1st N_Port 2nd N_Port PG_ID Current Enabled
None
ag
0 23 yes
2
37