Brocade Communications Systems 8 Command Reference Manual page 370

2
firmwareDownloadStatus
To display the status of a firmware download on a switch:
To display the status of a firmware download on a chassis:
338
switch:admin> firmwaredownloadstatus
[1]: Fri Feb 15 22:17:03 2007
Firmware is being downloaded to the switch. This step may take up to 30
minutes.
[2]: Fri Feb 15 22:20:54 2007
Firmware has been downloaded to the secondary partition of the switch.
[3]: Fri Feb 15 22:22:19 2007
The firmware commit operation has started. This may take up to 10 minutes.
[4]: Fri Feb 15 22:22:51 2007
Switch is relocating an internal firmware image.
[5]: Fri Feb 15 22:25:15 2007
The commit operation has completed successfully.
[6]: Fri Feb 15 22:25:46 2007
The internal firmware image is relocated successfully.
[7]: Fri Feb 15 22:25:46 2007
Firmwaredownload command has completed successfully. Use firmwareshow to
verify the firmware versions.
switch:admin> firmwaredownloadstatus
[1]: Mon Dec 19 18:40:19 2007
Slot 6 (CP1, active): Firmware is being downloaded to standby CP. This step
may take up to 30 minutes.
[2]: Mon Dec 19 18:46:18 2007
Slot 6 (CP1, active): Firmware has been downloaded successfully to Standby CP.
[3]: Mon Dec 19 18:46:25 2007
Slot 6 (CP1, active): Standby CP is going to reboot with new firmware.
[4]: Mon Dec 19 18:47:45 2007
Slot 6 (CP1, active): Standby CP booted successfully with new firmware.
[5]: Mon Dec 19 18:47:56 2007
Slot 8 (FR4-18i): Firmware is being downloaded to the blade. This step may
take up to 10 minutes.
[6]: Mon Dec 19 18:48:50 2007
Slot 5 (CP0, active): Forced failover succeeded. New Active CP is running new
firmware
[7]: Mon Dec 19 18:48:57 2007
Slot 5 (CP0, active): Firmware is being download to standby CP. This step may
take up to 30 minutes.
[8]: Mon Dec 19 18:49:28 2007
Slot 8 (FR4-18i): Firmware has been downloaded successfully. Blade is
rebooting with the new firmware.
[9]: Mon Dec 19 18:50:12 2007
Fabric OS Command Reference
53-1001764-02