Brocade Communications Systems 8 Command Reference Manual page 202

2
cryptoCfg
Use the --show -tape_sessions command to display all tape sessions in progress on the local
node or for a specific container. The display includes the following information:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes Encryption groups and HA clusters must be configured before performing any CryptoTarget
container and Crypto LUN configurations.
When adding a LUN to a CryptoTarget container, special attention should be paid to the input
format. A LUN number can be entered either as a 16-bit (2 bytes) number in hex notation (for
example, 0x07) or as a 64-bit (8 bytes) number in WWN format (for example,
00:07:00:00:00:00:00:00). Although the command does accept decimal input, it is not
recommended. The conversion function used to parse the LUN number converts a decimal number
170
-
Operation in progress. Displays one of the following:
•
Read Phase
•
Write Phase
•
HA Sync Phase
•
LUN Cleanup
-
VI: virtual initiator port WWN and node WWN
-
VI PID: virtual initiator PID
-
Number of blocks: numeric value
-
Block size: numeric value (in KB)
-
Size of the LUN (in bytes)
-
Current logical block address (LBA) being processed
-
Rekey Role: Primary Or Backup
Number of tape sessions in progress: numeric value
Container name: user-defined label
EE node name: node WWN
EE Slot Number: slot number
Target: target port WWN and node WWN
Target PID: Target PID
VT: virtual target port WWN and node WWN
VT PID: virtual target PID
Host: host port WWN and node WWN
Host PID: host PID
VI: virtual initiator port WWN and node WWN
VI PID: virtual initiator PID
LUN number: numeric identifier
Tape session number: numeric identifier
For each Tape session:
-
Number of uncompressed blocks: numeric value
-
Number of compressed blocks: numeric value
-
Number of uncompressed bytes: numeric value
-
Number of compressed bytes: numeric value
Fabric OS Command Reference
53-1001764-02