Brocade Communications Systems 8 Command Reference Manual page 945

Output generated by this command may vary by switch configuration and platform. Output may
change without notice.
Operands This command has the following operands:
slot
port1[-por2]
lines
Examples To display debugging information for a single port on a Brocade 5300:
Fabric OS Command Reference
53-1001764-02
On bladed systems only, specifies a slot number, followed by a slash (/).
Specifies a port or a range of ports for which to display supportShow
information. this operand is optional; if omitted, the command displays
information for all ports.
Specifies the number of lines for the portLogDump output. This parameter is
valid only with the slot/port parameters.
switch:admin> supportshow 43
VF
======================
Date:
Sun Dec 6 05:10:13 PST 2009
Time Zone:
America/Los_Angeles
Version:
Kernel: 2.6.14.2
Fabric OS: v6.4.0_main_bld09
Made on: Tue Dec 1 20:04:36 2009
Flash: Wed Dec 2 11:54:49 2009
BootProm: 1.0.15
supportshow groups enabled:
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
iswitch enabled
asic_db enabled
iscsi enabled
fcip disabled (not applicable to this platform)
ag enabled
dce_hsl enabled
**** Begin start_port_log_cmd group ****
Sun Dec 6 05:10:14 PST 2009
portlogdump:
CURRENT CONTEXT -- 0 , 128
portlogdump :
time task event port cmd args
2
supportShow
913