Brocade Communications Systems 8 Command Reference Manual page 939

Examples To set the FTP parameters:
To display the FTP parameters:
To set FTP parameters interactively:
To set the time interval at which the FTP server connectivity is checked:
To enable auto file transfer:
To disable auto file transfer:
See Also supportSave, supportShow, traceDump
Fabric OS Command Reference
53-1001764-02
switch:admin> supportftp -s -h 1080::8:800:200C:417A -u njoe -p password -d support
supportftp: ftp parameters changed.
switch:admin> supportftp
Host IP Addr: 1080::8:800:200C:417A
User name: njoe
Remote Dir: support
FTP Auto check: Off
switch:admin> supportftp -s
Host IP Addr[1080::8:800:200C:417A]:192.168.67.126
User Name[njoe]:admin
Password[********]:password
Remote Dir[support]:temp
Auto file transfer parameters changed
switch:admin> supportftp -t 24
supportftp: ftp check period changed.
switch:admin> supportftp -e
support auto file transfer enabled.
switch:admin> supportftp -d
support auto file transfer disabled.
2
supportFtp
907