Brocade Communications Systems 8 Command Reference Manual page 422

2
haShow
Operands none
Examples To display CP status on a Brocade 48000, first on a healthy standby CP and then on a faulty
standby CP:
To display CP status on a Brocade DCX with a healthy standby CP:
See Also haDisable, haEnable, haFailover
390
switch:admin> hashow
Local CP (Slot 6, CP1): Active, Cold Recovered
Remote CP (Slot 5, CP0): Non-Redundant
switch:admin> hashow
Local CP (Slot 6, CP1): Active, Warm Recovered
Remote CP (Slot 5, CP0): Standby, Failed
HA enabled, Heartbeat Up, HA State not in sync
switch:admin> hashow
Local CP (Slot 7, CP1) : Active, Cold Recovered
Remote CP (Slot 6, CP0) : Standby, Healthy
HA Enabled, Heartbeat Up, HA State Synchronized
Backplane PCI fail, severity: CRITICAL
Fabric OS Command Reference
53-1001764-02