Fcrphydevshow - Brocade Communications Systems 8 Command Reference Manual

2

fcrPhyDevShow

fcrPhyDevShow
Displays the FC Router physical device information.
Synopsis fcrphydevshow [-a][-f FID][-w wwn][-c][-d]
Description Use this command to display the physical (real) devices that are configured to be exported to other
fabrics. A device is considered to be configured to be exported to another fabric if it is a member of
an LSAN zone. The device is displayed only if it is discovered in the EX_Port-attached fabric and
backbone fabric's name server (for instance, the device is online).
Physical device information is available only for physical devices that exist in fabrics attached to
EX_Ports of FC Routers on the same backbone fabric as this FC Router.
The default output displays only physical device information relevant to this FC Router. Relevant
physical devices include physical devices that are configured to be exported from fabrics attached
to this FC Router's EX_Ports.
The physical devices are listed by fabric.
The -f and -w operands allow searching for physical devices based on fabric ID or port world wide
name.
"No device found" is displayed if there is no physical device information available at this FC Router.
Each line of the output displays:
Device Exists in Fabric
WWN
Physical PID
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
-a
-a -f FID
-w wwn
-c
-d
296
The fabric in which the physical device exists.
The world wide name of the device port.
The port ID of the physical device. This port ID is only relevant on the fabric
specified by the "Device Exists in Fabric" column.
Displays all physical devices for all FC Routers in the same backbone fabric
whether or not they are relevant to this FC Router.
Displays the physical devices in the specified fabric for all FC Routers in the
same backbone fabric whether or not they are relevant to this FC Router.
Displays the physical devices with the specified port WWN.
Clears login-related counters.
Displays login-related counters in login try (local failure, remote failure)
format. Login try counter represents the number of times the device has
attempted to log in. Local failure counter represents the number of times the
device login failed due to missing LSAN zones within the device's fabric.
Remote failure counter represents the number of times the device login failed
due to missing LSAN zones within the remote fabric. Counters are cleared
upon reboot or failover.
Fabric OS Command Reference
53-1001764-02