Iscsiportcfg - Brocade Communications Systems 8 Command Reference Manual

2

iscsiPortCfg

iscsiPortCfg
Displays or modifies iSCSI port parameters.
Synopsis iscsiportcfg --clearstats slot/geport
iscsiportcfg --default slot/geport
iscsiportcfg --show slot/geport [-v]
iscsiportcfg --modify slot/geport options
Description Use this command to display or modify the iSCSI port parameters.
The default iSCSI port settings are as follows:
TABLE 21
Setting
Error recovery level
Connections per session
Connections per session
Header digest support
Immediate data support
First burst length value
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
--modify
--clearstats
--default
460
Default iSCSI port settings
Modifies the port parameters on the specified port. Valid options are:
-e value Specifies the error recovery level; values are 0, 1, or 2.
-c value Specifies the TCP of connections; values are 1 or 2.
-d value Enables or disables data digest support; specify 0 to disable or 1 to enable.
-a value Enables or disables header digest support; specify 0 to disable or 1 to
enable.
-i value Enables or disables immediate data support; specify 0 to disable or 1 to
enable.
-f value Specifies the first burst length value; values include 512, 1024, 2048, 4096,
8192, 16384, and 32768.
Clears port-level iSCSI statistics on the specified port.
Resets the port to the default values. See the "Description" section for the list
of default values.
Default
0
1
Disabled
Disabled
No
512
Fabric OS Command Reference
53-1001764-02