Brocade Communications Systems 8 Command Reference Manual page 802

2
portShow
Function Commands supported only on the Brocade 7500/7500E and FR4-18i
Synopsis portshow option [slot/]ge_port [all| tunnel_id ] [arguments]
Description Use this command to display configuration parameters and status information for FCIP tunnels on
the Brocade 7500/7500E switch and on the FR4-18i blade. The following display options are
supported only on these platforms:
•
•
•
•
•
In Fabric OS v6.2.0 and later, each GbE port is associated with a TCP history, which tracks the state
of statistics at the moment of a TCP connection failure. An entry is logged for the TCP connection
when it encounters any of the following failures:
•
•
•
You can display the TCP history with the fciptunnel -hist command. This command displays a
maximum of 16 entries. Once the maximum history length is reached, the oldest entry is removed
from the end, and the newest entry is added to the front of the TCP history as future connection
failures occur. The following data items are captured when a TCP connection encounters a failure:
Reason
RTT
RTT H
Var
Var H
OOO
OOO H
Sendw Cwnd
Rx win
Fast Rtx
770
portShow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnel configuration settings
including the following:
-
Additional performance parameters
-
FC data path credit data
-
Connection parameter information
-
IKE and IPSec policy information on IPSec-enabled tunnels
-
VC to FCIP QoS mapping table
-
FCIP TCP Byte Stream statistics on Byte Stream-enabled tunnels
-
History of TCP connections
-
SnapShow capture of TCP statistics between two points in time
portShow iscsi - Displays iSCSI configuration information.
portShow mode- Displays Port Mode information.
portShow ficon - Displays FICON parameters on FICON-configured tunnels.
portShow inbandmgmt - Displays inband management configuration (Brocade 7500 only).
Maximum number of retransmits is exceeded (MAX RTX)
Maximum keep alive timeout is exceeded (KEEPALV TO)
RST packet is received (RESET RCVD)
The reason for the TCP connection failure
Round trip time
Round trip time high water mark
Variance
Variance high water mark
Counter of out-of-order segments
Out-of-order segments high water mark
Size of sender congestion window (bytes)
Size of receive window (bytes)
Fast retransmits
Fabric OS Command Reference
53-1001764-02