Diagclearerror - Brocade Communications Systems 8 Command Reference Manual

diagClearError

Clears the diagnostics failure status.
Synopsis diagclearerror [[--slot] slot] -all
Description Use this command to clear the diagnostics failure status.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
--slot slot
-all
If no operand is specified, the default is to clear all bad port flags.
Examples To clear the diag software flag:
See Also none
Fabric OS Command Reference
53-1001764-02
Specify the slot on which to clear the diagnostics failure status. The default is
set to 0 and designed to operate on fixed-port-count products.
If specified, all blades clear
switch:admin> diagclearerror 8
ERROR: DIAG CLEARERR
Diagnostics Errors Cleared, port: 8/31
Err# 0120041 081F
diagClearError
.
2
203