Brocade Communications Systems 8 Command Reference Manual page 817

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
This command is not supported on FCoE ports.
Operands This command has the following operands:
slot
port
-long
Examples To display the 64-bit hardware statistics for a port:
Fabric OS Command Reference
53-1001764-02
swConnUnittStatRxMulticastToObjects, stat_mc_to
The number of multicast timeouts.
For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
Specify a port number to be displayed, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
Displays the counters as one single 64-bit number. This operand is optional;
if omitted, the lower and upper 32-bits are reported as two separate
numbers.
switch:user> portstats64show 4/15
stat64_wtx 0
316
stat64_wrx 0
1486
stat64_ftx 0
69
stat64_frx 0
73
stat64_c2_frx 0
0
stat64_c3_frx 0
37
stat64_lc_rx 0
8
stat64_mc_rx 0
0
stat64_mc_to 0
0
stat64_mc_tx 0
0
tim64_rdy_pri 0
60438254
tim64_txcrd_z 0
2
er64_enc_in 0
0
er64_crc 0
0
er64_trunc 0
0
er64_toolong 0
0
er_bad_eof 0
top_int : 4-byte words transmitted
bottom_int : 4-byte words transmitted
top_int : 4-byte words received
bottom_int : 4-byte words receive
top_int : Frames transmitted
bottom_int : Frames transmitted
top_int : Frames received
bottom_int : Frames received
top_int : Class 2 frames received
bottom_int : Class 2 frames received
top_int : Class 3 frames received
bottom_int : Class 3 frames received
top_int : Link control frames received
bottom_int : Link control frames received
top_int : Multicast frames received
bottom_int : Multicast frames received
top_int : Multicast timeouts
bottom_int : Multicast timeouts
top_int : Multicast frames transmitted
bottom_int : Multicast frames transmitted
top_int : Time R_RDY high priority
bottom_int : Time R_RDY high priority
top_int : Time BB_credit zero
bottom_int : Time BB_credit zero
top_int : Encoding errors inside of frames
bottom_int : Encoding errors inside of frames
top_int : Frames with CRC errors
bottom_int : Frames with CRC errors
top_int : Frames shorter than minimum
bottom_int : Frames shorter than minimum
top_int : Frames longer than maximum
bottom_int : Frames longer than maximum
top_int : Frames with bad end-of-frame
2
portStats64Show
785