Secactivesize - Brocade Communications Systems 8 Command Reference Manual

2

secActiveSize

secActiveSize
Displays the size of the active security database.
Synopsis secactivesize
Description Use this command to display the size of the active security database. The command also displays
the maximum database size.
For switches running Fabric OS v6.2.0 and later, the maximum security database size is 1
megabyte per logical switch. With up to eight partitions, the total database size on a chassis can be
up to 8 megabytes. On switches that are not Virtual Fabric-capable, the security database is limited
to 1 megabyte. For switches running earlier versions of Fabric OS (up to v5.3.0), the maximum size
is 256 Kilobytes.
Notes The effective security DB size is the lowest supported by the fabric. The presence of a Standby CP
that runs an earlier version of the operating system will drop the effective security DB size on an
Active CP that runs Fabric OS v6.2.0.
The Brocade 200E is unable to handle the maximum DB size supported in v6.2.0 and issues a
compact flash warning when the active security database is close to the 1 MB limit.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the size of the active security database:
See Also secDefineSize, secGlobalShow
824
switch:admin> secactivesize
Size of security active data: 35 bytes (Max 1048576 bytes)
Fabric OS Command Reference
53-1001764-02