Stopporttest - Brocade Communications Systems 8 Command Reference Manual

2

stopPortTest

stopPortTest
Terminates the running portTest.
Synopsis stopporttest [-ports itemlist]
Description Use this command to terminate the portTest command. Refer to the portTest help page for more
information.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
-ports itemlist
Examples To stop the portTest command:
See Also portLoopbackTest, portTest, portTestShow, spinFab
904
Terminates the test on the specified ports; this operand is optional; if omitted,
the test is terminated on all ports. Refer to itemList help pages for further
details.
switch:admin> stopporttest
Fabric OS Command Reference
53-1001764-02